• v1.7.1 7fcdb80b05

    tomtom released this 2026-11-18 01:15:44 +01:00 | 0 commits to main since this release

    Fixed

    • The bridge no longer forgets the phone. When a reconnect to the phone failed authentication (a short radio glitch is enough), the bridge's Bluetooth stack deleted the pairing, and you had to re-pair the phone, which on iPhone also switched off Show Notifications and stopped text messages. Bridge firmware v7 keeps a backup of the pairing and restores it automatically (the bridge restarts for a few seconds and reconnects). If you really removed the bridge on the phone, normal pairing still works.
      • CallRec Desk offers the firmware update for the bridge; click Update. The current pairing survives the update.
    • Text messages reconnect by themselves. When the phone refuses message access (on iPhone: Show Notifications off for CallRec), CallRec Desk now asks again every 30 seconds, so switching it on works without reconnecting the phone.
    • Contacts aren't wiped by an empty sync. If the phone sends an empty phone book (on iPhone: Sync Contacts off), the contacts and recent calls from the last sync are kept, and the log says which switch to turn on.
    • Moved to git.ttdk.eu/tomtom/CallRec: the updater, links and release history now live there. Copies older than 1.7.0 still look for updates on the old address and need to be updated by hand once.

    If you find this useful, you can support the project at paypal.me/tomtomdk. More projects are at tomtomdk.eu.

    Downloads
  • v1.7.0 048a7b728a

    tomtom released this 2026-11-01 07:59:26 +01:00 | 2 commits to main since this release

    New

    • Stream Deck call profile. When a call rings (or you place one), your Stream Deck XL and Stream Deck + switch to a CallRec Desk call profile, and switch back to the profile you were using when the call ends.
      • Stream Deck XL: Answer, Decline / Hang up, Mute, Record, Audio PC / Phone, Call volume - / +, Messages, plus the caller, phone status (signal, carrier, battery), Open CallRec Desk and a Back key.
      • Stream Deck +: the same keys, with dials for the caller (name and call time on the touch strip, press to answer or hang up), call volume (press to move the audio between PC and phone), mic volume and phone status.
      • Stream Deck installs the profiles the first time a call comes in. You can rearrange them like any other profile.
      • Switch it off under Settings → Stream Deck → Switch Stream Deck to the call profile during calls.
      • Choose which Stream Decks switch profiles (call and contacts) under Settings → Stream Deck: each connected XL / + gets a checkbox, so you can keep one on your own profile.
    • Contact list on the Stream Deck. The Contacts key opens your contact list as a small card on screen. Like the call card, it stays on top without taking focus from a game. Your Stream Deck XL / + switches to a contacts profile:
      • XL: 24 contacts per page on the keys (press once to select, again to call), plus Up/Down, Page up/down, previous/next letter, Call and Close.
      • Stream Deck +: 4 contacts on the keys, a dial to scroll (and one for fast scrolling) with the selected contact on the touch strip, and a dial to jump between letters.
      • The list closes by itself after 45 seconds without input, and when a call comes in.
    • Speed dial key. Put Speed dial on any key and pick a contact (or type a number) in its settings; pressing it calls.
    • New Stream Deck actions you can also place on your own profiles: Answer, Decline / Hang up, Caller, Phone status, Call volume (dial), Call volume up / down, Back / Close list, Speed dial and the contact list keys and dials.
    • The local control API accepts callVolume / callVolumeDelta, dial and contacts, and reports callVolume and the contact list.

    If you find this useful, you can support the project at paypal.me/tomtomdk. More projects are at tomtomdk.eu.

    Downloads
  • v1.6.1 c698854803

    tomtom released this 2026-10-02 17:58:39 +02:00 | 8 commits to main since this release

    New

    • Call pop-up that doesn't interrupt you. An incoming call shows a small card in the bottom-right corner with the caller and Answer / Decline buttons. It stays on top but never takes focus, so a game or other app keeps your keyboard and mouse, even when you click the buttons. It closes by itself when the call is answered or ends. It replaces the old behaviour of pulling the whole window to the front; switch it off under Settings → Window to get a tray notification instead.
      • Shows over windowed and borderless-fullscreen games. Games in exclusive fullscreen don't let any other window show on top.
      • Choose where it appears: under Settings → Window → Show on, pick the primary monitor, the monitor your mouse pointer is on, the monitor CallRec Desk is on, or a specific display, and pick a corner. If the chosen display is unplugged, the card uses the primary monitor. Test shows a preview.

    Fixed

    • Opening the app now brings it to the front. When CallRec Desk was already running in the tray, opening it again from the Start menu left the window behind your other windows.

    If you find this useful, you can support the project at paypal.me/tomtomdk. More projects are at tomtomdk.eu.

    Downloads
  • v1.6.0 5ef17d5dc5

    tomtom released this 2026-10-02 11:08:23 +02:00 | 10 commits to main since this release

    New

    • Phone signal and battery in the status area: signal bars (0–5), the carrier name, "roaming" when it applies, and the phone's battery level. Hover for details. Needs bridge firmware v6, which the app offers under Settings → Firmware.
      • Dual SIM: over Bluetooth the phone reports one SIM's signal (its active line), so the bars show that line.
    • The control API now includes signal, phoneBattery and carrier, for the Stream Deck and other tools.

    Notes on dual SIM

    Bluetooth hands-free and message access don't let accessories choose the SIM, and iPhones don't say which line a call or text arrived on. To control which line calls and texts from the PC use, set a preferred line on the contact in the iPhone's Contacts app, or change Default Voice Line in the iPhone's settings.

    If you find this useful, you can support the project at paypal.me/tomtomdk. More projects are at tomtomdk.eu.

    Downloads
  • v1.5.1 18cfb5ded4

    tomtom released this 2026-10-02 09:56:09 +02:00 | 11 commits to main since this release

    Fixed

    • The phone no longer stays disconnected after a dropped link. When the Bluetooth link is lost unexpectedly (the phone moved out of range, or radio interference), the bridge now keeps trying to reconnect in the background, after 5, 10, 20 and 30 seconds and then once a minute, until the phone is back. Deliberate disconnects (from the phone, or when the app closes) are left alone. Needs bridge firmware v5, which the app offers under Settings → Firmware.
    • The log now explains why the phone disconnected, for example "connection timeout - the phone was out of range or the radio was disturbed".

    New

    • A Reconnect button appears next to "Phone: not connected" for an immediate retry.

    Tip: if the link drops often, the bridge may be sitting behind the metal PC case. A short USB extension cable that puts the board on or under the desk usually fixes that.

    If you find this useful, you can support the project at paypal.me/tomtomdk. More projects are at tomtomdk.eu.

    Downloads
  • v1.5.0 8b1be5eb12

    tomtom released this 2026-10-01 14:54:22 +02:00 | 12 commits to main since this release

    New

    • Text messages. A new Messages tab shows your conversations with contact names and unread dots, in a chat-style view. Type a reply and press Send (or Ctrl+Enter), or start a New message to a number or a contact name. New texts arrive live, pop up in the tray, and opening a conversation marks it read on the phone too.
      • Works through the phone's Bluetooth message service (MAP). Needs bridge firmware v4; the app offers the update under Settings → Firmware.
      • iPhone: turn on Show Notifications for CallRec (Settings → Bluetooth → ⓘ next to CallRec). iOS only shares the ~10 newest incoming texts and not ones you send from the phone itself, so the app keeps its own history on your PC as texts arrive and as you send them.
      • Messages are stored only on this PC. You can switch the feature off under Settings → Messages.
    • Stream Deck plugin 1.2: a Messages key shows how many texts are unread; pressing it opens the newest unread conversation. Update it under Settings → Stream Deck.

    Improved

    • Tab contents can now be read by screen readers and other accessibility tools.
    • While a call is ringing, the audio status says "ringing" instead of "on the phone".

    If you find this useful, you can support the project at paypal.me/tomtomdk. More projects are at tomtomdk.eu.

    Downloads
  • v1.4.0 00664acd1c

    tomtom released this 2026-10-01 02:22:59 +02:00 | 17 commits to main since this release

    New

    • Contacts from your phone: the bridge fetches your phone's contacts and recent calls over Bluetooth (PBAP), which shows up as new Contacts and Recents tabs. The first time, your phone asks whether CallRec may access contacts. On iPhone this is the "Sync Contacts" switch under Settings → Bluetooth → ⓘ next to CallRec.

    • Save your own numbers in the app (Add / Edit / Delete). These stay on this PC and are kept separate from the phone's list.

    • Caller names in the call display, notifications, tray, recording file names and on the Stream Deck Answer key.

    • Call by name: type a name in the dial box, or double-click a contact or recent call.

    • USB driver check: if your ESP32 board is plugged in but Windows has no working driver for its USB chip, CallRec Desk now says so and offers a Get driver button to the official download page:

      • Silicon Labs CP210x (e.g. NodeMCU ESP-32S)
      • WCH CH340/CH341 and CH343/CH9102
      • FTDI

      Install the driver, then unplug and replug the board; the app picks it up automatically.

    Fixed

    • Firmware flashing could erase the bridge's Bluetooth pairing. When the bootloader or partition table needed rewriting, the ESP32's built-in loader erased more flash than requested. The flasher now uses writes that erase exactly what they replace. If your phone stopped connecting after a firmware update, forget CallRec in the phone's Bluetooth settings and pair it again.

    Needs

    • Bridge firmware v3 for contacts. The app offers the update automatically (Settings → Firmware).
    • Stream Deck plugin 1.1 for names on the keys (Settings → Stream Deck → Update plugin).

    If you find this useful, you can support the project at paypal.me/tomtomdk. More projects are at tomtomdk.eu.

    Downloads
  • v1.3.1 8538336c97

    tomtom released this 2026-10-01 01:03:30 +02:00 | 19 commits to main since this release

    New

    • Test incoming call (Settings → Window → "Pop up on incoming calls" → Test): after a 5-second countdown it simulates a ringing call, so you can see the pop-up, the Windows notification, the green tray icon and the blinking Stream Deck Answer key without anyone calling. Answer or Hang up ends the test; nothing is sent to the phone. It stops by itself after 20 seconds.
    • Stream Deck and other local tools can start a test call with {"cmd":"testCall","delay":0}.

    If you find this useful, you can support the project at paypal.me/tomtomdk. More projects are at tomtomdk.eu.

    Downloads
  • v1.3.0 6ba79dc305

    tomtom released this 2026-10-01 00:54:53 +02:00 | 20 commits to main since this release

    First release of CallRec Desk: take phone calls on your PC through an ESP32 Bluetooth bridge, and record them.

    Downloads

    • CallRecDesk-Setup-1.3.0.exe: Windows installer. If the .NET 8 Desktop Runtime is missing, setup offers to install it through winget.
    • CallRecDesk.streamDeckPlugin: Stream Deck plugin. The app can also install it for you (Settings → Stream Deck).
    • SHA256SUMS.txt: checksums. The built-in updater checks the installer against them.

    What's in it

    • The phone pairs with a NodeMCU ESP-32S as a Bluetooth headset (iPhone and Android, no phone app needed).
    • Call audio on your PC headset and mic, with stereo WAV recording (left = caller, right = you).
    • Answer, hang up, dial and redial; mute; mic volume; move the call between the PC and the phone.
    • System, Light and Dark theme; tray icon with call-state colours; start with Windows.
    • Built-in ESP32 flasher: checks the board and writes only what differs (firmware v2 included).
    • The bridge's Bluetooth sleeps when the app isn't running, so calls stay on the phone.
    • Stream Deck plugin: live Answer/Hang up, Record timer, Mute and audio-route keys, plus a Stream Deck + dial for mic volume.
    • Built-in updater (Settings → About), which checks this releases page.

    The installer isn't code-signed, so Windows SmartScreen may warn. Choose More info → Run anyway.

    If you find this useful, you can support the project at paypal.me/tomtomdk. More projects are at tomtomdk.eu.

    Downloads